= Required To Complete Order
The Stander frame (specify color) and the main body support. Select either the prone, supine or multi-position configuration and other available components.
You have selected:
Expand All | Collapse All
Our products are painted using a baked-on powder coating process also used in the automotive industry. It is designed to stand up to wind and weather, and conforms to American and European toy safety standards.
With prone configuration, the user leans forward on the body support.
(Includes trunk laterals and pelvic harness.)
With supine configuration, the user leans back on the body support.
(Includes upper trunk support with headrest, and trunk laterals.)
With multi-position configuration, the stander can be switched between supine (the user leans back on the body support) and prone (the user leans forward on the body support).
(Includes upper trunk support with headrest, trunk laterals, and pelvic harness.)
The padded trunk strap is placed under the arms and provides positioning for the upper body.
The trunk rotation control strap has a wide padded section that wraps around the user. The webbing piece attached to the outside can be tightened at either end to provide rotational control at the trunk for users who benefit from this.
The standard legs allow independent adjustment in upper and lower leg length, and can accommodate leg length discrepancies.
The advanced legs allow independent adjustment in upper and lower leg length, and can accommodate leg length discrepancies. They also allow knee angle adjustment, assisting hip and knee flexion to accommodate contractures.
A pair of supine head laterals can be mounted at the headrest and can adjust independently in height and width to accommodate different user sizes and varying needs for head support.
The supine butterfly harness, a five-point harness, can be used instead of the trunk strap for supine standing. It is ideal for users who need more upper body positioning and stabilization.
The supine standard hip strap provides support at the user’s hips.
The supine hip rotation control strap has a wide padded section that wraps around the user. The webbing piece attached to the outside can be tightened at either end to provide rotational control at the hips for users who benefit from this.
Supine knee straps stabilize the knee on the padded leg support.
Available for supine standing only.
Prone knee cuffs wrap around the user’s knee and provide medial/lateral stabilization of the knee on the padded leg support. They also prevent knee hyperextension for users who benefit from that. In addition, some rotational control may be added by tightening the strap on one side of the cuff more than the other.
Prone knee cuffs are available for prone standing only.
The tray has a single mounting point at the side of the stander.
Its position can be adjusted easily by loosening all three knobs that face downward and moving the tray to the desired position before tightening the knobs again. The tray’s angle can be adjusted with the knob under its center. To adjust the tray’s height, use the knob that faces forward.
The tray can swing out of the way for transfers.
The tray may be used in either prone or supine position.
The trunk laterals can be used at the lateral trunk or lower down at the lateral pelvis area. The white trigger where the lateral support inserts into the side of the body support allows width adjustment, while the white button on the lateral support itself allows it to flip away for transfers. The knob on the lateral support allows individual height adjustment of each pad.
The medial/lateral thigh supports provide abduction or adduction. Because the pads are positioned off-center on their mounting, they can be placed higher or lower, by switching them from side to side. One or two pairs of these pads may be used.
S420 New Size 2 Stander
Subtotal:
For pricing discount, Log In or Create An Account